How To Use Neje Engraver For Mac

It's been a long 2 weeks, we all just got Covid one after another, but Thankfully are all better now!In this video I will use Neje software to cut hardboard. Welcome to use NEJE Model: DK-8-KZ Laser Engraving Machine Course. NEJE DK-8-KZ is a desktop miniature engraving machine designed for desktop computers. It is recommended to use the computer browser to watch.

Activation

In order to ensure that the machine is powered off during transportation, the factory will sleep the machine in advance.

The first time you use it, you need to connect the usb cable to activate the machine.

Download

NEJE Android APP

Attention:Before opening the software, please start the machine's power and top switch

System Requirements：(android 4.0 above， Bluetooth 4.0 support)

Step1: Scan QR code or click install the app by your android phone or android pad.

Please download the latest version !

NEJE_V2.4.apk — 2020.6.12 bug fix;

NEJE V2.3.apk — 2020.3.16 Also supports master 2

NEJE_V2.2.apk ( 2019.11.14 updated, Optimize bugs that some android mobile phone model transmission interruption )

NEJE_V2.1.apk ( 2019.10.26 updated, new android software for NEJE BL Macine)

NEJE_V2.0.apk ( 2019.9.18 updated, new android software for NEJE BL Macine)

NEJE_V1.0.apk ( Android software for NEJE BL Macine before 2019.9.18)

Step2: Turn on Bluetooth in the phone settings.

Attention:The phone settings just make sure that the phone's Bluetooth function is turned on and that the connection to the machine is in the app interface.

Step3: open the app.

Attention:Before opening the app, please start the machine's power and top switch, Make sure the machine is on.

'NEJE Wireless' APP for iOS, ipadOS and macOS:

Attention:Before opening the software, please start the machine's power and top switch

System Requirements：(iOS 10.0 above，macOS 10.15 above, Bluetooth 4.0 support)

Step1: Scan QR code or click install the app by your iphone, itouch, macbook.

'NEJE Wireless' APP (update at 2020.3.25, Don‘t support old model (without digital tube))

DownLoad ios APP (The old APP)

Step2: Turn on Bluetooth in the phone settings.

Attention:The phone settings just make sure that the phone's Bluetooth function is turned on and that the connection to the machine is in the app interface.

Step3: open the app.

Attention:Before opening the app, please start the machine's power and top switch, Make sure the machine is on.

NEJE Software for Windows

System Require: win xp SP3, win7 win8, win10

Step1: DownLoad windows driver:

Step2: DownLoad windows software ( Select the latest software Download ):

NEJE_v5.4.2.exe — 2020.12.4- bug fix.

NEJE_V5.3.5.exe — 2020.9.5-bug fix.

NEJE_V5.2.exe — 2020.6.12-Optimize positioning function, optimize software experience, fix a little bug.

NEJE_V4.7.2.exe — 2019.12.15(Update a little bug. )

NEJE_V4.7.exe — 2019.11.15(increase positioning function. )

NEJE_V4.6.1.exe — 2019.10.05(Fix software connectivity issues. )

NEJE_V4.6.0.exe — 2019.9.10(Update bugs. )

NEJE_V4.5_1071.exe — 2019.7.20(Update the latest instruction for new mainboard, Compatible with past machines. )

N-Scanner V1.0_EN.apk ( only supports Android phone ，work with windows software)

If your operating system does not have the Microsoft 4.0 environment installed, you need to reinstall the operating environment. If the software can be opened directly, you can ignore it:

NEJE Mac software

System Require: OS X 10.10 or higher, 64-bit

Important update：

(Macbook software has been updated on November 28, 2020. There is no need to install driver. If you are a new user or an already installed user, you can ignore this step and download the latest software directly from the Apple store.)

Download software from Mac APP Store

Search for the keyword: “NEJE”

Caution

1.The machine certified to CEFCC FDA certification, the radiation values far below the EU and the United States standards, You may rest assured to use

2.Our machine laser energy is not that huge enough to damage you if hand or other part of body stay in the curving scope accidentally during curving, but, you’d better be careful since it’s abnormal operation of machine. We can’t assure it’s no harm definitely.

3.Do not take out the laser head, and exposure to body!

4.Do not use in where the children can touch!

5.Keep away from flammable and explosive materials!

6.There’s an emergency pause button designed on the top of machine that can be used in an emergency!

unbox

Unpack: Remove the tape and EPE used for packaging and fixing machines, There is a pearl cotton pad below the bottom plate and behind the radiator. Please note! Turn on power switch and top ON/OFF switch, and Connect data cable to computer., At this point the machine will go into preparation.

Connect the machine to computer: Connect the usb cable to computer.

Turn on the machine: Turn on the machine's power switch and top ON/OFF switch.

Connection

Operation

What about NEJE Scanner ?

How to replace the old laser tube!

— Choose a picture from “Photo Gallery” or Drag a picture from your computer into the middle of the control interface.

—Edit image size, insert text, position engraving area.

— Set burning time and control engraving.When you browse the photo gallery or edit your favorite pictures, you can click the right mouse button to bookmark “My Collection”.

—Adjustable focusing lenses

Adjustable focusing lenses

The smaller the focus adjusted by rotating the focus cap, the better the effect of engraving, and the higher the accuracy.

Fixed the surface of the carved objects at the level of the bearing table, put on the focusing glasses( sent in random) (maybe will not adapt it at the beginning, just to be used as focus),rotate the focus head manually, shown in figure:

Observe the light down to the surface in the smallest point of the object , when the rotation to the smallest point, indicating that the focal length has been adjusted, note that the smaller the focus adjustment, the image engraving effect is more fine, if the focal length is not adjusted, there may be no image to be carve;

—Determine engraving area

Point positioning

Drag pictures

Frame positioning—Adjust picture size

How to use the Iphone APP!

NOTE! Please turn on the Bluetooth function before using the mobile phone software, but do not use the Bluetooth connection in the mobile phone settings （No need to enter Bluetooth password）

1. Connect Bluetooth at “search”.

2. Take a picture or choose a picture from “album”.

3. “Effect” processing.

4. “Send” pictures to the machine.

5. “Controller” engraving.

Maintain

● Avoid prolonged exposure to dusty environments

● If you don't use it for a long time, wrap it up as best as possible and avoid dust affecting machine performance.

● Put it on a safe place to avoid dropping.

● Avoid working in a dry environment to avoid damage to the machine caused by static electricity.

● Add a little of butter on the slide. If you don't use the machine long time.

FAQs

Q: If you have problem with the device connection of bluetooth, please do the following?

A: Please note: Can't connect the device in the system settings, run neje app, it will automatically connect.

If you have problem with the device connection of bluetooth, please do the following:Plug out then plug in the power supply of the device to restart the device. At this time, only one red LED will be on. If the blue light is on, please contact us.

Run the NEJE app, and the connection should be completed within 5 seconds. If not, please check:

1. Have you turn on the location function of the mobile phone. Some mobile phones need to turn on the location function to search for Bluetooth, otherwise the device cannot be found.

2. Change another cell phone and run NEJE app, is the connection OK？

If you still can't solve your problem, please contact us and provide a video of following:

1. Can the Laser Carver be found in your system settings?

2. Is the problem solove after change a cell phone?

3. What is the status of device after restarted? Is the red LED on?

— What materials can be carved, how to fix materials?

Objective engraving material: “Smooth, Organic, opaque, Non- flame- retardant material For example: Wood, Gray cardboard, bamboo, Leather etc.

Unsuitable engraving material: ” Those material unable to burn &focus“ For example: Pure metal(without coating), transparent plastic, White paper(Astigmatic),PP plastic etc.

Fix the object to be carved with a silicone pad and rubber band or other auxiliary tools.

— FAQs

1.The machine works, but it doesn't carved out?

a.Whether the material is suitable for carving, The machine is engraved by burning, so it is impossible to engrave inorganic materials such as stones. In general, materials that can be Burnt black with a lighter can be used for engraving, but plastics that be added Anti-combustion and pure white paper that aasy astigmatism can't be burned. Some paper can't burned because of adding powder or film.

b.Whether the surface of the engraved material is flat.

c.Whether the object is fixed well.

d.Whether the focal length is adjusted accurately.

e.Is the burning time set properly?.

2.Why does the machine keep hitting a straight line?

The chassis is driven by a stepper motor. If the weight of the load is too heavy, the motor will not be able to complete the drive. Please reduce the weight of the engraving object.3.The power connection is normal, but the machine does not move?

The mechanical structure may be stuck by foreign objects. For the first time, please remove the fixed mechanical EPE. If the machine lacks maintenance for a long time, you can add a small amount of lubricating oil to maintain the mechanical joint.4.Laser running to one side?

The mechanical joints have sand-sized foreign bodies that affect the mechanical work, and can quickly slide back and forth to eject foreign objects.5.Some parts cannot be carved?

It may be that there is a foreign object inside the laser tube that blocks the light path output. You can remove the focusing mirror to check if there is any foreign matter.6.Have a ghost.

It may be that the engraved object is not fixed, and the displacement occurs when engraving. Please place a silicone anti-slip pad under the engraved object and fix it with a rubber band.7.Carving half.

It may be that the mechanical structure has been displaced during engraving. Please turn off the power of the machine and restart it, so that the machine can be reset again, and avoid the displacement of the bottom plate or laser during the operation.8.Engraving depth is not enough.

The material to be engraved, whether the surface of the material is flat, whether it is fixed and flat, whether the focal length is adjusted accurately, whether the burning time is appropriate, and the number of repeated engravings will affect the engraving depth. Please adjust according to the above actual factors.9.Why are some white papers not carved?

Some white papers are too thin, with flame retardant lime powder, or a plastic film on the surface. These will affect the focus and energy burning. It is recommended to use gray cardboard as the test material.10.Why are some woods not carved?

All wood can be engraved, please ensure that the surface of the wood is fixed parallel to the laser burning surface, and the curved wood may not work well due to the change of focal length.

— About laser head!

Solid laser head: There's life span for the laser head , and laser type normally are CO2, Multimode high power laser, small solid-state laser, Our DK-BL uses Nichia blue 405nm single-mode laser diode, the official service life is 10000 hours, the normal use in about 3 months -1 years, but it's also closely related to how you use it .(main factors include : The temperature, time intensity, current, voltage, anti static treatment, adverse rate etc. )The laser module quality control technology

Laser module quality control process: The laser modules used by Our DK-BL is the best one that with constant current drive modules, along with a stable cooling system. And every single-mode module has being through 3 hours aging tested. and are well packaged before outgoing. So the machine that every user received had PASS a serial of reliability test. but even so, there may be 0.05% chance that the machine you receive may have the laser durability problem. In this case, please confirm within 3 days, and feed back to the dealer, we can arrange replacement for you for free.

What about the laser head life? There’s service life for all laser products, the laser tube official life is 100,000 hours, but the actual life will depends on actual usage. In general, 3 Month - 1 year, or may be many years.

How to ensure the life of the laser? In order to protect the life of the laser, We do not recommend long-times use.How to judge the laser head burned?

How To Use Neje Engraver For Macintosh

1.When the machine is working, the light was significantly weakened.

2.When the machine is working, the light scattered, unable to focus and the light weakened.

3.The burning time, Carving material, focal length all ok, but can't burn out the object.

— How to replace the old laser tube!

Step1: use the L wrench Screw the screws on the back of the machine and open the back of panel.

Step2: use the L wrench Screw the screws on the radiator. and replace the laser tube.

— How to replace the motor assembly!